QuFe10Cr - Bobbin
Product number:
Qu1002Cr-100-SH253
Product information "QuFe10Cr - Bobbin"
QuFe10Cr is preferred for changes to and repairs of mould cavities made from tempered materials
1.2311, 1.2312, 1.2162, 1.2738, 1.2764 and 1.2767.
The Cr-content in the weld increases the tensile strength, cutting edge quality and the
resistance to wear. Can be used in the long-term range for operating temperatures up to
570°C.
Possible Hardness: 28 – 37 HRC.
Dependent on layers and hardness of the base material.
Material analysis
C: 0,1 | Si: 0,5 | Mo: 0,5 | Mn: 1,1 | Cr: 1,2 | Fe: Rest
| Bobbin size: | K80, K125, K250, MA125, SH253 |
|---|---|
| Bobbin weight: | 100 g, 200 g, 500 g |
| Diameter: | 0,2 mm, 0,3 mm, 0,4 mm, 0,5 mm, 0,6 mm, 0,8 mm |
| Recommendations for basis material: | 1.2162, 1.2311, 1.2312, 1.2738, 1.2764, 1.2767, 13CrMo 4 4, 25CrMo4, 42CrMo4, AISI4130, AISI4140, GS-17 CrMo5 5 |
| Refinish: | Hardenable , chrome-plated , erodible , etable , nitridable , polishable, remunerable , structurable |
| Wire: | Laser welding wire |