QuFe13 - Bobbin
Product number:
Qu1304-200-K80
Product information "QuFe13 - Bobbin"
QuFe13 is due to the excellent hot wear resistance and toughness used for highly stressed hot
working tools, which are simultaneously subjected to high mechanical, thermal and
abrasive loads, such as aluminum die casting moulds and resin molds. These alloys
guarantee a good resistance against corrosive acting plastic. Also when multi-layer
welding, the weld is free of cracks. Machined with carbide tools.
Possible Hardness: 42 – 46 HRC.
Dependent on layers and hardness of the base material.
Only under certain conditions can it be hardened.
Material analysis
C: 0,25 | Si: 0,5 | Mn: 0,7 | Cr: 5,0 | Mo: 4,0 | Ti: 0,6 | Fe: Rest
| Bobbin size: | K80, K125, K250, MA125, SH253 |
|---|---|
| Bobbin weight: | 100 g, 200 g, 500 g |
| Diameter: | 0,2 mm, 0,3 mm, 0,4 mm, 0,5 mm, 0,6 mm, 0,8 mm |
| Recommendations for basis material: | 1.2082, 1.2083, 1.2343, 1.2344, 1.2367, 1.2606 |
| Refinish: | CVD-coatable , chrome-plated , machinable , nitridable , polishable, remunerable |
| Wire: | Laser welding wire |