QuFe13 blank - Rod
Product number:
Qu1305-S-blank-333
Product information "QuFe13 blank - Rod"
QuFe13 blank is due to the excellent hot wear resistance and toughness used for highly stressed hot
working tools, which are simultaneously subjected to high mechanical, thermal and
abrasive loads, such as forging dies and hammers. This alloy guaranties good stability
besides corrosive processing plastic. Also free of cracks when multilayer welding.
Workable using carbide tools.
Achievable hardness is up to 42 – 46 HRC according to development and layer.
Can be hardened under certain conditions.
The weld is non copper-coated.
Achievable hardness is up to 42 – 46 HRC according to development and layer.
Can be hardened under certain conditions.
The weld is non copper-coated.
Materila analysis
C: 0,25 | Si: 0,5 | Mn: 0,7 | Cr: 0,7 | Mo: 4,0 | Ti: 0,6 | Fe: Rest
| Diameter: | 0,2 mm, 0,3 mm, 0,4 mm, 0,5 mm, 0,6 mm, 0,8 mm |
|---|---|
| Recommendations for basis material: | 1.2082, 1.2083, 1.2343, 1.2344, 1.2367, 1.2606 |
| Refinish: | CVD-coatable , chrome-plated , machinable , nitridable , polishable, remunerable |
| Rod length: | 333 mm, 1000 mm |
| Wire: | Laser welding wire |