QuFe21 - WIG
Product number:
Qu2110-WIG
Product information "QuFe21 - WIG"
QuFe21 is used for highly wear resistant build-ups on machine parts and tools, subject to heavy
abrasion and compression combined with moderate impact at elevated temperatures,
such as slide, guide and sealing surfaces. Low wear when using fiber-glass re-enforced
plastics.
Possible Hardness: 53 - 58 HRC. Dependent on layers and hardness of the base material.
On multilayer coatings, cache coating with QuFe65 or QuNi26
Possible Hardness: 53 - 58 HRC. Dependent on layers and hardness of the base material.
On multilayer coatings, cache coating with QuFe65 or QuNi26
Material analysis
C: 0,35 | Si: 0,3 | Mn: 1,2 | Cr: 7,0 | Mo: 2,2 | Ti: 0,3 | Fe: Rest
| Diameter: | 1,0 mm, 1,2 mm |
|---|---|
| Recommendations for basis material: | 1.2082, 1.2083, 1.2311, 1.2312, 1.2343, 1.2344, 1.2367, 1.2606, 1.2764, 1.2765, 1.2766, 1.2767, 1.2842 |
| Refinish: | CVD-coatable , chrome-plated , machinable , nitridable , polishable, remunerable |
| Rod length: | 1000 mm |
| Wire: | WIG wire |